Plastic Films Pin Water Droplets Like Rose Petals Do

產業訊息 - 2016/5/12

Materials: Researchers print nanoscale patterns into the surface of plastic films to prevent water droplets from rolling off

Materials scientists often turn to the plant kingdom for ideas on how to design surfaces that trap or repel water. Some have mimicked the surfaces of rose petals to engineer nanoscale patterns that cling to water droplets. Now researchers report a simple method to print large-area, water-pinning plastic films (Langmuir 2014, DOI:10.1021/la4034996). With a practical manufacturing method, these water-trapping films could find commercial applications, such as controlling condensation in greenhouses or liquid flow in microfluidic devices.

In the early morning, dew clings to rose petals; when the sun rises, the dewdrops act like tiny lenses, making diffraction patterns that attract pollinating insects, says Jaslyn Bee Khuan Law, a materials scientist at the Agency for Science, Technology, and Research (A*STAR), in Singapore. A drop of water will cling to a rose petal even when it’s tilted or held upside down. The petals can hold onto these droplets because their surfaces consist of closely packed conical structures a few micrometers across. These microscale surface patterns tweak the surface tension of the water droplets, causing them to cling to the petals.

Researchers first mimicked this effect by using rose petals as templates to mold water-pinning structures onto polyvinyl acetate and polydimethylsiloxane films. Others have made water-pinning surfaces by using complex methods, such as chemical vapor deposition, to carve out similarly shaped, nanoscale structures in silicon or metals. Making the features on the nanoscale enhanced the water-pinning effect.

But none of these fabrication methods are amenable to large-scale, low-cost manufacturing, preventing commercialization of the water-clinging surfaces. So Law turned to a specialty of her lab: nanoimprint lithography. This printing method utilizes metal or silicon drums molded with nanoscale features on their surfaces. When the molds are heated and pressed against sheets of plastic, the plastic is embossed with the nanoscale pattern. This roll-to-roll printing process resembles the way newspapers are printed. It’s capable of producing large-area films in a short amount of time.

Law and her colleagues set out to demonstrate that water-pinning films could be made using nanoimprint lithography, as well as to refine the nanoscale surface designs. They designed several different surfaces, created molds for each design, and then compared the water-pinning performance of polycarbonate and poly(methyl methacrylate) films made using the molds. To test the films, the researchers held them perpendicular to the ground and added larger and larger droplets of water, until the droplets slid off.

Water droplets easily slid off plastic films patterned with simple nanoscale gratings; isolated nanoscale pillars hung onto water slightly better. But the films with the best properties consisted of tightly packed cones about 300 nm tall. Plastic patterned with these structures could hold onto water droplets as massive as 69 mg. The team could print a 110- by 65-mm sheet of this plastic film at a speed of 10 m per minute. Currently, the dimensions of the films are limited by the size of the premade molds, Law says.

For nanoscale water-pinning surfaces to reach the market, they will need an economical way to be manufactured, says Mark A. Hayes, a chemist at Arizona State University. “This is one way to get there,” he says.

While the Singapore group has made good progress on manufacturing these materials, very basic, vexing questions about how water clings to these surfaces remain, Hayes says. For example, very small changes in the surface’s roughness can switch it from water-pinning to super hydrophobic, and researchers don’t have a detailed understanding of why.

Law says her group plans to both push the materials towards commercialization and study the basic physics behind these phenomena.

以上資料來自American Chemical Society <http://goo.gl/1WX5lj>

若有塑膠薄膜材料相關需求，歡迎您與我們聯繫。

塑膠薄膜材料網-寰宇尖端薄膜有限公司

www.film-top1.com

連絡電話：+886-2-23896392

傳真號碼：+886-2-23814236

電子信箱：unifilm001@gmail.com

專營項目：光學保護膜、製程保護膜、PO膜、防霧膜、可印刷PP膜、PP.PE.PET保護膜、抗靜電薄膜、夜光膜

產品優勢：共擠押出技術、好撕不殘膠、環保無溶劑型、客製化製作、薄膜種類樣式多

其他服務：免費樣品測試、1對1薄膜選購諮詢、貿易商業務合作、塑膠薄膜聯盟行銷

相關產品：光學保護膜、製程保護膜、面板保護膜、高黏著保護膜、低黏著保護膜、自黏膜、增亮膜、導光板保護膜、偏光板、高透明包裝膜、冷熱防霧膜、可微波包裝、食品包裝膜、晶圓切割膜、翻晶膜、抗靜電包裝、隔熱膜、多層膜、彩藝膜、鏡面膜、防爆膜、金屬保護膜、可印刷PP膜、夜光膜、塑膠膜、電鍍保護膜、熱收縮膜、PET膜、PP膜、PE膜、Optical Protective Film, Masking Film, Self-adhesion Film, Roll to Roll, Roll 2 Roll, BEF, IR cut, UV cut, Multi-Layer Film, Mirror Film, Hot Mirror, Cold Mirror, Printable Film, PO Film, Anti-Foggy Film. Anti-Static Film, Low Adhesion Protective Film, High Adhesion Protective Film, PET, PP, PE, Package Film, Package Materials, Light Guide Plate Protective Film、Shrinkable Film、Printable PP Film

上一筆回到列表下一筆